2026-09-19T16:40:14Zhttps://api.mountainscholar.org/server/oai/request

oai:mountainscholar.org:10217/474322025-12-30T03:24:09Zcom_10217_100532com_10217_100000com_10217_100369com_10217_100303col_10217_100538col_10217_100381

Mohapatra, Swagat, author Bienkiewicz, Bogusz J., advisor Venayagamoorthy, Subhas K., committee member Sakurai, Hiroshi, committee member 2007-01-03T05:16:13Z 2007-01-03T05:16:13Z 2011 Mohapatra_colostate_0053N_10393.pdf http://hdl.handle.net/10217/47432 https://doi.org/10.25675/3.018560 Wind loading is an important environmental factor to be considered in design of components and support structures of ground mounted photovoltaic tracker systems (PVT). Current understanding of action of wind on such systems is incomplete. Over the past decade, a number of investigations devoted to this topic have been carried out. However, majority of these efforts have been of proprietary nature. As a result, limited amount of data on wind loading on PV systems can be found in open literature. This study describes a wind tunnel study of wind effects on a generic ground mounted photovoltaic tracker system. The study was carried out at the Wind Engineering and Fluids Laboratory, Colorado State University. During the wind tunnel testing, the dynamic wind loading exerted on an isolated PVT system was measured and the effects of various parameters of the system on the wind loading were investigated. The investigated parameters included: the system porosity, inclination angle, wind direction and arrangement of the PV panels. A scaled model of the system was mounted on a High Frequency Force Balance (HFFB) and wind induced forces and moments were measured in a simulated atmospheric boundary layer flow. The work described herein presents an overview of the study and discusses the obtained main findings. It is concluded that certain combination of the system parameters led to a significant reduction in the exerted wind loads. A comparison of wind tunnel based design wind loads with those obtained from American Society of Civil Engineers Standard (ASCE 7-05) demonstrated reasonable agreement between the measured peak wind loads and design loads recommended by the standard. born digital masters theses English eng Colorado State University. Libraries 2000-2019 Copyright and other restrictions may apply. User is responsible for compliance with all applicable laws. For information about copyright law, please see https://libguides.colostate.edu/copyright. solar energy wind tunnel wind engineering solar tracker Wind tunnel investigation of wind load on a ground mounted photovoltaic tracker Text Master of Science (M.S.) Masters Civil and Environmental Engineering Colorado State University This Item is protected by copyright and/or related rights (https://rightsstatements.org/vocab/InC/1.0/). You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s). open.access